National Item Identification Number

01-379-7352
013797352
5970-01-379-7352
5970013797352

National Stock Number

Item Name

INSULATOR,WASHER

Federal Supply Class

5970

Referenced on: http://www.tpub.com/content/trucks2.5tonv1-2/TM-9-2320-365-24P/css/TM-9-2320-365-24P_1016.htm
Referenced on: http://www.tpub.com/content/trucks2.5tonv1-2/TM-9-2320-365-24P/css/TM-9-2320-365-24P_1118.htm
Referenced on: http://www.tpub.com/content/trucks2.5tonv1-2/TM-9-2320-365-24P/css/TM-9-2320-365-24P_927.htm
Referenced on: http://trucks5ton.tpub.com//TM-9-2320-366-24P-2/TM-9-2320-366-24P-20440.htm
Referenced on: http://trucks5ton.tpub.com//TM-9-2320-366-24P-2/TM-9-2320-366-24P-20641.htm
Referenced on: http://trucks5ton.tpub.com//TM-9-2320-366-24P-2/TM-9-2320-366-24P-20819.htm
Referenced on: http://trucks5ton.tpub.com//TM-9-2320-366-24P-2/TM-9-2320-366-24P-20820.htm
Referenced on: http://trucks5ton.tpub.com//TM-9-2320-366-24P-2/TM-9-2320-366-24P-20821.htm

Description

An insulator that is essentially thin and flat, with one through hole centrally located. The general shape may vary by the addition of features such as beveled edges, indented surfaces, through hole keys, and/or peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. Excludes items with more than one hole. See also INSULATOR, DISK; INSULATOR, BEAD; INSULATOR, BUSHING; and INSULATOR, PLATE

Commercial and Government Entity Code (Supplier Data)

---

0FW39

---

STEWART & STEVENSON TACTICAL VEHICLE
SYSTEMS LP
5000 INTERSTATE 10 HWY
SEALY
TX
77474
713-867-1850

---

19207

---

---

4K133

---

GHX INCORPORATED
DBA GHX INC
7111 ARDMORE
HOUSTON
TX
77054
713-579-3137

---

Reference Numbers (Part Numbers)

12419875
12419875
12419875

Required Categories

STYLE DESIGNATOR
INSIDE DIAMETER
OUTSIDE DIAMETER
OVERALL HEIGHT
MATERIAL AN

Required Description

Q1 ROUND, FLAT
11.0 MILLIMETERS NOMINAL
29.0 MILLIMETERS NOMINAL
3.2 MILLIMET